Turning Center

CUTEX-160

6"-8" Chuck, Horizontal Turning Center

The pinnacle of Hwacheon technology, the CUTEX-160 quickly became the industry standard in small-size turning centers when it was introduced. With its compact design, rigid construction, and a wide range of options such as bar feeder and parts catcher, the CUTEX-160 is a perfect solution for all your production requirements. The machine incorporates L-HTLD, the Hwacheon Lathe Tool Load Detection system, which monitors the tool load in real time to protect your valuable assets and to provide consistent, quality results.


REQUEST A QUOTE Catalog PDF
CUTEX-160

Specification CUTEX-160A CUTEX-160A MC CUTEX-160B CUTEX-160B MC
Chuck Size 6.00 inch 6.00 inch 8.00 inch 8.00 inch
Coolant 21.40 gal 21.40 gal 21.40 gal 21.40 gal
Electrical Power Supply 20.00 kVA 25.00 kVA 20.00 kVA 25.00 kVA
Feed Motor (X/Z) 2.4/2.4 HP 4/2.2 HP 2.4/2.4 HP 4/2.2 HP
Floor Space (L×W) 93.43 x 59.84 inch 93.43 x 59.84 inch 93.43 x 59.84 inch 93.43 x 59.84 inch
Height 67.72 inch 67.72 inch 67.72 inch 67.72 inch
Hydraulic 2.91 gal 2.91 gal 2.91 gal 2.91 gal
Lubrication 0.53 gal 0.53 gal 0.53 gal 0.53 gal
Max. Bar Size 1.77 inch 1.77 inch 2.01 inch 2.01 inch
Max. Cutting Diameter 11.81 inch 10.24 inch 11.81 inch 10.24 inch
Max. Cutting Length 11.81 inch 8.86 inch 11.18 inch 8.23 inch
Max. Drill/Tap Size 0.63/M12 inch 0.63/M12 inch
Max. Spindle Speed 6000.00 rpm 6000.00 rpm 4500.00 rpm 4500.00 rpm
Max. Stroke (X/Z) 6.69/13.19 inch 6.69/13.19 inch 6.69/13.19 inch 6.69/13.19 inch
Min. Index Angle 0.00 ° 0.00 °
NC Controller Fanuc 0i-TF Fanuc 0i-TF Fanuc 0i-TF Fanuc 0i-TF
Number of Tool Station 12.00 ea 12.00 ea 12.00 ea 12.00 ea
Quill Diameter 2.36 inch 2.36 inch 2.36 inch 2.36 inch
Quill Stroke 3.15 inch 3.15 inch 3.15 inch 3.15 inch
Quill Taper #4 MT #4 MT #4 MT #4 MT
Rapid Speed (X/Z) 1,417.32/1,417.32 ipm 1,417.32/1,417.32 ipm 1,417.32/1,417.32 ipm 1,417.32/1,417.32 ipm
Spindle Bearing Inner Diameter 3.54 inch 3.54 inch 3.94 inch 3.94 inch
Spindle Motor 15/10 HP 5/3 HP 15/10 HP 15/10 HP
Standard Cutting Diameter 7.32 inch 8.03 inch 7.32 inch 8.03 inch
Swing over Bed 21.65 inch 21.65 inch 21.65 inch 21.65 inch
Through Spindle Hole Diameter 2.20 inch 2.20 inch 2.44 inch 2.44 inch
Tool Size 1 x 1.5 inch 1 x 1.5 inch 1 x 1.5 inch 1 x 1.5 inch
Turret Indexing Time 0.15 sec/step 0.15 sec/step 0.15 sec/step 0.15 sec/step
Type of Spindle Nose A2-5 ASA A2-5 ASA A2-6 ASA A2-6 ASA
Weight 7055.00 lb 7231.00 lb 7055 lb 7231.00 lb